:	May 21, 2008

.

Disconnect the battery ground cable.

.

Remove the auxiliary battery tray.

.

: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to follow these instructions may result in personal injury. Disconnect the 2 fuel pipes.   Release the 2 fuel pipe clips.

.

Remove the fuel line support bracket.   Release the fuel pipe from the clips.   Remove the bolt.

.

Remove the RH exhaust gas recirculation (EGR) valve outlet tube.

.

Disconnect the RH EGR valve electrical connector.

.

Release the RH EGR cooler.   Remove and discard the clip.   Remove the bolt.

.

Release the RH EGR valve from the cylinder head.   Remove the 3 bolts.

.

Remove the RH EGR valve.   Remove the 2 bolts.   Remove and discard the gasket.

.

Install the RH EGR valve.   Clean the component mating faces.   Install a new gasket.   Tighten the bolts to 10 Nm (7 Ib.ft).

.

:   Do not tighten at this stage. Install the RH EGR valve bolts.

.

:   Install a new clip. Secure the RH EGR cooler.   Secure the clip.   Tighten the bolt to 10 Nm (7 lb.ft).

.

Secure the RH EGR valve.   Tighten the bolts to 10 Nm (7 Ib.ft).

.

Connect the RH EGR valve electrical connector.

.

Install the RH EGR valve outlet tube.

.

Install the fuel line support bracket.

.

Connect and secure the low-pressure fuel lines.

.

Install the auxiliary battery tray.

.

Connect the battery ground cable.