:	Jul 4, 2007

.

Disconnect the battery ground cable.

.

Remove the auxiliary battery tray.

.

Remove the RH exhaust gas recirculation (EGR) valve outlet tube.

.

Disconnect the RH EGR valve electrical connector.

.

Release the RH EGR cooler.   Remove and discard the clip.   Loosen the bolt.

.

Release the RH EGR valve from the cylinder head.   Remove the 3 bolts.

.

Remove the RH EGR valve.   Remove the 2 bolts.   Remove and discard the gasket.

.

Install the RH EGR valve.   Clean the component mating faces.   Install a new gasket.   Tighten the bolts to 10 Nm (7 lb.ft).

.

:   Do not tighten at this stage. Install the RH EGR valve bolts.

.

:   Install a new clip. Secure the RH EGR cooler.   1) Secure the clip.   2) Tighten the bolt to 10 Nm (7 lb.ft).

.

Secure the RH EGR valve.   Tighten the bolts to 10 Nm (7 lb.ft).

.

Connect the RH EGR valve electrical connector.

.

Install the RH EGR valve outlet tube.

.

Install the auxiliary battery tray.

.

Connect the battery ground cable.