:	Jul 14, 2004

: Since injury such as scalding could be caused by escaping steam or coolant, do not remove the engine coolant temperature sensor while the system is hot.

: Engine coolant will damage the paint finished surfaces. If spilt, immediately remove the coolant and clean the area with water.

.

Disconnect the battery ground cable.

.

Remove the engine cover.

.

Disconnect the ECT sensor electrical connector.

.

Remove the ECT sensor.   Lift the tang and rotate the ECT sensor anti-clockwise.   Remove and discard the O-ring seal.

.

Install the ECT sensor.   Clean the component mating faces.   Install a new O-ring seal.

.

Connect the ECT sensor electrical connector.

.

Check and top-up the coolant.   Clean any remaining coolant from around the hoses and pipes.

.

Install the engine cover.

.

Connect the battery ground cable.