:	May 17, 2004

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the differential locking motor.   Disconnect the electrical connector.   Remove the 4 bolts.

.

Clean the component mating faces.

.

Apply continuous bead of sealant to the motor mating face on the differential.

.

Install the differential locking motor.   Tighten the bolts to 10 Nm (7 lb.ft).   Connect the electrical connector.

.

Lower the vehicle.

.

Using T4, calibrate a new differential locking motor.