:	Jun 23, 2004

.

Disconnect the battery ground cable.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Drain the engine oil.

.

Release the harness bracket.   Remove the 2 nuts.

.

Remove the oil pan.   Remove the 10 bolts.   Remove and discard the gasket.

.

Install the oil pan.   Clean the component mating faces.   Install a new gasket.   Evenly and progressively tighten the bolts to 10 Nm (7 lb.ft).

.

Install the harness bracket.   Tighten the nuts to 6 Nm (4 lb.ft).

.

Fill the engine with oil.

.

Connect the battery ground cable.