:	May 10, 2004

.

Disconnect the battery ground cable.

.

Remove the engine cover.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Release the exhaust system from the exhaust manifold.   Remove and discard the 2 bolts.

.

Lower the vehicle.

.

Disconnect the high tension (HT) electrical connectors.   Move the leads aside for access.

.

Remove the exhaust manifold.   Remove the 6 nuts.   Remove and discard the gasket.

.

Install the exhaust manifold.   Clean the component mating faces.   Install a new gasket.   Evenly and progressively, tighten the nuts to 25 Nm (18 lb.ft).

.

Connect the HT electrical connectors.

.

Raise the vehicle.

.

Install the exhaust system.   Clean the component mating faces.   Install new bolts and tighten to 40 Nm (30 lb.ft).

.

Lower the vehicle.

.

Install the engine cover.

.

Connect the battery ground cable.