:	Aug 1, 2006

.

Remove the spare wheel and tire.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Position the vehicle on a lift.

.

Disconnect the battery ground cable.

.

Remove the RH rear wheel and tire.

.

Remove the fender moulding.

.

Release the fuel leak detection filter.   Disconnect the breather hose from the fuel leak detection pump.

.

Remove the fuel leak detection filter and breather hose assembly.   Release the breather hose from the clip.   Remove and discard the cable tie.

.

Install the fuel leak detection filter and breather hose assembly.   Secure with a cable tie.   Secure the breather hose in the clip.

.

Attach the fuel leak detection filter breather hose to the pump.

.

Install the fender moulding.

.

Install the RH rear wheel and tire.   Tighten the wheel nuts to 140 Nm (103 lb.ft).

.

Connect the battery ground cable.

.

Install the spare wheel and tire.