:	Jun 24, 2004

.

Disconnect the battery ground cable.

.

Remove the front radiator grille.

.

Remove the coolant expansion tank.

.

Siphon the fluid from the power steering reservoir.

.

: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open connections to prevent contamination. :   Some fluid spillage is inevitable during this operation. Using the special tool, disconnect the cooler line.   Position an absorbent cloth to collect fluid spillage.

.

Disconnect the steering reservoir return hose.   Position an absorbent cloth to collect fluid spillage.   Release the clip.

.

Release the LH radiator air deflector lower clip, position the deflector aside.

.

Position the LH horn aside for access.   Remove the nut.

.

Remove the cooler line seperating clip.

.

:   Care must be taken to prevent damage to the cooler elements during removal and installation. Remove the power steering fluid cooler.   Release the 3 clips.

.

Install the power steering fluid cooler.   Position and secure in the clips.

.

Install the cooler line seperating clip.

.

Install the horn assembly.   Tighten the nut to 10 Nm (7 lb.ft).

.

Install the radiator deflector.   Secure with the clip.

.

Install the power steering fluid line and hose.   Clean the component mating faces.   Secure the hose with the clip.

.

Install the coolant expansion tank.

.

Install the radiator grille.

.

Connect the battery ground cable.

.

Fill and bleed the power steering system.