: | Mar 27, 2007 |
. |
Raise and support the vehicle. |
. | Remove the wheel and tire. |
. | Loosen the halfshaft retaining nut. ![]() |
. | Remove the brake disc. |
. | Remove the halfshaft retaining nut.
|
. | Loosen the tie-rod end ball joint retaining nut. |
. | Using the special tool, release the tie-rod end
ball joint from the wheel knuckle.
![]() |
. | Release the wheel speed sensor from the wheel
knuckle.
![]() |
. |
Remove and discard the stabilizer bar link nut. |
. | Loosen the upper arm retaining nut. |
. | Using the special tool, release the upper arm
ball joint. ![]() |
. | Using the special tools, release the halfshaft
from the drive flange. ![]() |
. | Remove the lower ball joint retaining nut. |
. | Using the special tool, release the lower ball
joint from the steering knuckle. ![]() |
. |
Remove the upper arm retaining nut.
|
. |
:
Remove the wheel knuckle. |
. | Remove the brake disc dust shield.
![]() |
. | Remove the wheel hub.
![]() |
. | Clean the components. |
. | Install the wheel hub.
|
. | Install the brake disc dust shield.
|
. |
With assistance, install the wheel knuckle. |
. | Using the special tools, install the halfshaft
in the wheel hub. ![]() |
. | Connect the upper arm and wheel knuckle.
|
. | Secure the stabilizer bar link.
|
. | Tighten the lower arm ball joint retaining nut to 115 Nm (85 lb.ft). |
. | Connect the tie-rod end ball joint.
|
. | Install a new halfshaft retaining nut and lightly tighten. |
. | Install the wheel speed sensor.
|
. | Install the brake disc. |
. | Tighten the new halfshaft retaining nut to 350
Nm (258 lb.ft).
|
. | Install the wheel and tire.
|