:	Sep 26, 2007

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the wheel and tire.

.

Loosen the halfshaft retaining nut.

.

Release the brake hose bracket from the wheel knuckle.   Remove the bolt.

.

Remove the wheel speed sensor retaining bolt.

.

: Do not allow the brake caliper to hang on the brake hose. Release the brake caliper anchor plate from the wheel knuckle and tie the caliper aside.   Remove the 2 bolts.   Tie aside complete with the wheel speed sensor.

.

Remove the brake disc.   Remove the Torx screw.

.

Remove the halfshaft retaining nut.   Discard the nut.

.

Using the special tools, release the halfshaft from the wheel hub.

.

Remove the wheel hub.   Remove the 4 bolts.

.

Clean the components.

.

Install the wheel hub.   Using the special tools, install the halfshaft in the wheel hub.   Tighten the 4 bolts to 115 Nm (85 lb.ft).

.

Install a new halfshaft retaining nut and lightly tighten.

.

Make sure the brake disc and hub mating surfaces are clean.

.

Install the brake disc.   Tighten the Torx screw to 35 Nm (26 lb.ft).

.

Secure the brake caliper anchor plate to the wheel knuckle.   Tighten the bolts to 275 Nm (203 lb.ft).   Align the wheel speed sensor.

.

Install the wheel speed sensor retaining bolt.

.

Secure the brake hose retaining bracket to the wheel knuckle.   Tighten the bolt to 22 Nm (16 lb.ft).

.

Tighten the new halfshaft retaining nut to 350 Nm (258 lb.ft).   Stake the nut to the halfshaft.

.

Depress the brake pedal several times, check the fluid level in the brake fluid reservoir and top-up with brake fluid if necessary.

.

Install the wheel and tire.   Tighten the wheel nuts to 140 Nm (103 lb.ft).