: | Jul 5, 2006 |
. |
Raise and support the vehicle. |
. | Remove the wheel and tire. |
. | Loosen the halfshaft retaining nut. ![]() |
. | Remove the brake disc. |
. | Release the parking brake cable.
![]() |
. | Release the wheel speed sensor from the wheel
knuckle.
![]() |
. | Disconnect the toe link.
![]() |
. | Remove the halfshaft retaining nut. |
. |
Release the knuckle from the lower arm.
![]() |
. | Using the special tools, release the halfshaft
from the wheel hub. ![]() |
. |
Disconnect the upper arm from the wheel knuckle.
![]() |
. |
Remove the wheel knuckle. |
. | Clean the components. |
. |
Install the wheel knuckle.
|
. | Connect the upper arm and wheel knuckle.
|
. | Using the special tools, install the halfshaft
in the wheel hub. ![]() |
. | Install a new halfshaft retaining nut and lightly tighten. |
. |
Connect the lower arm to the wheel knuckle.
|
. | Connect the toe link.
|
. | Install the wheel speed sensor.
|
. | Locate the parking brake cable to the backplate.
|
. | Install the brake disc. |
. | Tighten the halfshaft retaining nut to 350 Nm
(258 lb.ft).
|
. | Install the wheel and tire. |
. | Carry out the wheel alignment procedure. |