:
May 14, 2004
: The brake pedal MUST NOT be depressed during this operation. Failure to comply will result in damage to the stoplamp switch.
.
Remove the closing trim panel.
Release the clip.
Remove the 2 screws.
Disconnect the electrical connector.
.
Remove the stoplamp switch.
Disconnect the electrical connector.
Rotate the switch clockwise.
.
: The brake pedal MUST NOT be depressed during this operation. Failure to comply will result in damage to the stoplamp switch.
Install the stoplamp switch.
Rotate the switch counterclockwise.
Connect the electrical connector.
.
Install the closing trim panel.
Connect the electrical connector.
Secure the clip.
Tighten the screws.