:	Apr 29, 2004

.

Position the front seat fully forwards.

.

Make the SRS system safe.

.

Remove the B-pillar upper trim panel.

.

Release the safety belt upper anchor from the B-pillar.   Remove and discard the Torx bolt.

.

Release the front seat switch pack trim panel for access.   Remove the 2 screws.

.

Remove the front safety belt retractor.   Remove and discard the Torx bolt.

.

Install the front safety belt retractor.   Tighten the Torx bolt to 40 Nm (30 lb.ft).

.

Install the front seat switch pack trim panel.   Tighten the screws.

.

Attach the safety belt upper anchor.   Tighten the Torx bolt to 40 Nm (30 lb.ft).

.

Install the B-pillar upper trim panel.