:	May 13, 2004

.

If the central junction box (CJB) is to be replaced, connect T4 to the vehicle.

.

Remove the glove compartment.

.

Remove the passenger side closing trim panel.   Release the clip.   Remove the 2 screws.   Disconnect the electrical connector.

.

Remove the CJB.   Remove the 2 nuts.   Disconnect the 6 electrical connectors.

.

Install the CJB.   Connect the electrical connectors.   Tighten the nuts to 10 Nm (7 lb.ft).

.

Install the closing trim panel.   Connect the electrical connector.   Secure the clip.

.

Install the glove compartment.

.

Initiate a new CJB using T4.