This is a publication of Fluke Industrial B.V.,
		DIAGNOSTIC TOOLS DIVISION
		 Almelo, The Netherlands
	       (C) 1995 Fluke Corporation


Product      :  SW33W for Windows
                FlukeView CombiScope Software

Version      :  1.0 DEMO
Date         :  May 24, 1995

Contents:    1. Demo version with limited functionality.
             2. Duplicate File Found message during SETUP.
             3. Known problems with FlukeView CombiScope.

__________________________________________________________________


1. DEMO VERSION WITH LIMITED FUNCTIONALITY

   This demo will give you an impression of the functionality
   of the FlukeView CombiScope software. 
   The only things you can not do with this demo are saving 
   data on a file, making hardcopy output and copy to the 
   clipboard. Note that when a file is saved with an existing 
   filename, the program will delete the existing file and not
   save data on a new file.
    
   When no CombiScope is connected, the program will simulate
   data transfer with a CombiScope Model PM3394A.
   Also in this case, the Connect button must be activated in the 
   Instrument Connect dialog box that is displayed after starting
   the program.


   In combination with a Fluke CombiScope, FlukeView
   is the ideal software package for documenting, archiving and
   analyzing your measurements. 

   The following CombiScopes are supported:

       - PM3370A 
       - PM3380A
       - PM3382             
       - PM3382A
       - PM3384
       - PM3384A
       - PM3384E
       - PM3390A
       - PM3392
       - PM3392A
       - PM3394
       - PM3394A
 
   connected to the PC via the PM8914 Serial Interface Cable. 


   Ordering information:

       SW33W/011:     FlukeView CombiScope 
       SW33W/911:     FlukeView CombiScope multi-copy


   For more information call:

       In the U.S.A.:        (800) 443-5833  or fax (206) 356-5116
       In Europe:            (31-40) 644200  or fax (31-40) 644222
       In Canada:            (905) 890 7600  or fax (905) 890 6866
       From other countries: (1-206) 356-5500

__________________________________________________________________

2. DUPLICATE FILE FOUND MESSAGE DURING SETUP

   The Setup program of FlukeView, copies the files MSCOMM.VBX,
   CMDIALOG.VBX, COMMDLG.DLL, THREED.VBX, VBCTL3D.VBX,
   and VBRUN300.DLL to the System directory of Windows
   (e.g., \WINDOWS\SYSTEM).

   The following message will be given when one of these files is
   originally present in the Windows directory (e.g., \WINDOWS):

        "File <filename> is already present. If FlukeView
         can not be started, remove the file <filename>"

   When that is the case, Windows will load the original file,
   instead of the file that is supplied with FlukeView.
   Because the original file may not be compatible with the
   FlukeView software, you must remove the original file from
   the Windows directory, and run the Setup program again.

__________________________________________________________________

3. KNOWN PROBLEMS WITH FLUKEVIEW COMBISCOPE

   Please note the following problems you may encounter when 
   using FlukeView CombiScope:

   a. When a mouse is connected to a COM Port with the same
      interrupt level as the CombiScope COM Port, the connection
      to the CombiScope may fail.
      This can occur when COM1 and COM3 are used, for example.
      Connect the mouse or the CombiScope to another COM Port
      or change the interrupt level of a port (refer to the
      documentation of the PC or serial interface card).

   b. If, during communication with the CombiScope, the mouse is
      moved over the border of a window or over the stop button,
      the following error may error:
         "Communication error: Overrun error detected."

      Tip: Select the standard VGA display from the Options -
           System Settings menu command of the Windows Setup
           program to overcome this problem.

   c. The frequencies that are displayed at the X-axis of a
      Spectrum may overlap each other.

   d. When the mouse is positioned above a button on the toolbar,
      the statusbar displays a description text that corresponds
      with the button. If the mouse is quickly moved away, that
      text may not disappear.

   e. When you enter a small number in the Waveform Plot
      Parameters dialog box, the displayed value may slightly
      differ from the entered value. This may also occur when
      the scrollbar is used to move the waveform.

      Example: When you enter 500 µV, it might be changed
               to 499.99 µV.

   f. When the CombiScope is in the Single Trigger mode and no
      waveform has been acquired yet, the error message "Timeout"
      is given. 

   g. A low amount of Windows System Resources (memory), can affect
      the proper working of FlukeView. Pressing F1(=Help), for
      example, may not start Help anymore. You can determine the
      amount of System Resources by selecting About Program Manager
      in the Help menu of the Program Manager.

__________________________________________________________________

End of the README.TXT file.