Date: 05/06/2002
Product: TekConnect Adjust Application
Version: 1.1
   
The TekConnect Adjust Application is a Windows utility used to make internal
adjustments to TekConnect probes.  This application is intended to run only
on Tektronix scopes with TekConnect probes.  This application is not useful
for any BNC probes or TekProbe Level 1 or TekProbe Level 2 probes.

The specific equipment needed to perform probe adjustments are detailed
in each probe service manual.
  
===============================================================     
What is in this Readme File:
     
1. System Requirements
2. Contents of Distribution
3. New Features in 1.1
4. Known Problems
5. Installation
6. Contact Information

===============================================================
1. System Requirements

- An oscilloscope with TekConnect probe compatability.

- Disk space requirements:
   900KB of free disk space to install and operate this application.

- Refer to the specific probe service manual for more requirements.

===============================================================
2. Contents of Distribution

- P7240_Service.pdf	P7240 Service Manual
- P7330_Service.pdf	P7330 Service Manual
- P7260_Service.pdf	P7260 Service Manual
- TekConnectAdjust.exe	TekConnectAdjust application
  
===============================================================
3.0 New Features in 1.1

- Software added to perform P7260 Performance Verfication
- P7260 Service Manual in Acrobat format added 

3.1 New Features in 1.0

- This is the initial release, supporting P7240 and P7330 probes.

===============================================================
4. Known Problems

- None reported.

===============================================================
5. Installation

To run properly, this application must be installed on the hard drive of your
oscilloscope. It uses internal commands to validate test hardware, and to
communicate to the probes. 

NOTE: You do not need Java Runtime Environment.
NOTE: There is no option key required.

- To install the application on the hard disk, do the following.

To install the TekConnect Adjust application from the compact disc, do:
  1. If the keyboard is not installed, connect it to the oscilloscope rear
     panel (the optional-accessory keyboard plugs into the USB connector).
     It may be convenient to have a mouse installed too.
  2. Power on the oscilloscope to start Windows.
  3. If the scope application fills the display, minimize the application
     by selecting File | Minimize.
  4. Install the Optional Applications Software compact disc in
     the CD-ROM reader on the rear-panel of the oscilloscope.
  5. Select the My Computer icon.
  6. In the My Computer window, select the D: (CD-ROM) drive.
  7. Select the TekConnect Adjust directory.
  8. Select the file Setup.exe to start the install program.
  9. Follow the instructions given by the install program.

NOTE: Refer to the probe service manual for a list of other required equipment
      adjustment procedures.

Once installed the application can be found in the scope menus at:
Start | Programs | Tektronix | TekConnect Adjust | TekConnect Adjust

===============================================================
6. Contact Information

- Telephone:
	Contact your local Tektronix Representative at 1-800-833-9200
 		Sales support,     	select option 1
		Service support,	select option 2
		Technical support, 	select option 3

- WEB: (Contains the latest version of this software)

   	http://www.tektronix.com

	Click on "Software Drivers" and "Probes" under the "Resources" set of
	links to reach the Software Download Page.

	Click on "Accessories" and then click on "TekConnectAdjustSetup.exe"
	to download this software.

TekConnect is a trademark of Tektronix, Inc.

---End of File---